Glass spiral chute

Glass spiral chute

Glass spiral chute 1. It indicates that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The technical principle is the same: the mortar is slowly fed to the rotating groove surface through a feeding groove installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. Glass Spiral Chute III. Highlights and Features: 1. Ultra high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. The glass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper, and a support bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotary groove is equipped with a multi tube ore feeding homogenizer to screen minerals, which is easy to control. The mineral separator does not need to be placed on a cross (or tripod) on a support table. The mineral mortar with an average score is slowly fed onto the surface of the rotating groove through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is installed in a valve block type new product cutting groove, and the selected new equipment will be divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be differentiated, gathered, and led out. The transverse plane of the spiral chute and the slope change of the curve are extremely suitable for the sorting of fine-grained materials. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Glass spiral chute Glass spiral chute

Glass spiral chute

Glass spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen