Shaker and spiral chute

Shaker and spiral chute

Shaker and spiral chute 1. Introduction: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Shaker and Spiral Chute 3. The characteristic spiral chute is particularly popular in many gravity beneficiation equipment due to its low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear screening of ore, no moving parts, easy maintenance and management, and large single area output. The machine has a wide and stable groove surface, and the area where mineral mortar exhibits laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) sized ores. We in China have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200mm four heads is about 4-6 tons/hour. Shaker and spiral chute 4. Structural composition: The spiral concentrator is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product cutting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass reinforced coal gangue and connected together through screws. The sorting surface of the rotating groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, durable, and durable consumer goods. The head of the spiral groove is equipped with a multi tube ore feeder to evenly separate minerals, and the control is not complicated. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve type new product acquisition groove. The selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be collected and exported separately. The cross section and slope of the spiral chute are extremely suitable for the selection of fine particle materials. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. Shaker and Spiral Chute Shaker and Spiral Chute

Shaker and spiral chute

Shaker and spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen