Spiral chute flushing water position

Spiral chute flushing water position

Spiral chute flushing water position 1. Description: The beneficiation chute includes a slope flow sorting process. The slurry is fed to a inclined chute or inclined plane, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the groove, while the lower layer of heavy mineral stays in the groove or flows out at low speed from the bottom. After obtaining the concentrate and tailings, respectively. Glass fiber reinforced plastic chutes are mining and beneficiation equipment, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, strong processing ability, high efficiency, high enrichment ratio, high recovery probability, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. spiral chute flushing water position 3. Characteristic FRP spiral chute has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area, etc. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. The rinsing water position of the spiral chute is . The structure of the fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding trough, a rotating trough, a cutting trough, a gathering hopper, and a trough support. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. Spiral chute flushing water position Spiral chute flushing water position

Spiral chute flushing water position

Spiral chute flushing water positionRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen