The thickness of the original mold for the spiral chute

The thickness of the original mold for the spiral chute

The thickness of the original mold of the spiral chute is summarized as follows: 1. Overview: The gravity separation spiral chute summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal concentrators. After being evaluated by relevant scientific research, design, universities, and concentrators organized by the Ministry of Metallurgy, it is recognized as having superior performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, placer tin ore, tantalum niobium ore, niobium ore and other non-ferrous metals, rare mineral metals and nonferrous metal mineral bodies with different specific gravity. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. The thickness of the original mold for the spiral chute is 3. Characteristics: 1. Stable selection steps and easy operation. 2. Allowing different ranges of feed densities. 3. Very high enrichment ratio and high recovery rate. 4. Small footprint and low water consumption. 5. Simple structure without power. 6. Large processing capacity. 7. Simple and easy installation and operation. 8. Low investment and quick effect. The thickness of the original mold for the spiral chute is . 4 The chute can be divided into three types according to the Granularity of the processed mineral aggregate: (1) coarse spiral chute, the maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. The thickness of the original mold of the spiral chute The thickness of the original mold of the spiral chute

The thickness of the original mold for the spiral chute

The thickness of the original mold for the spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen