Product information display/Product display

Spiral chute selection of diamond sand

24-hour phone/WhatsApp：+8619870423316

Spiral chute selection of diamond sand

Spiral chute selection of diamond sand 1. Introduce the process of chute beneficiation, including inclined flow separation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The production principle is that the slurry is evenly distributed and slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types radially according to grade. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering bucket allows the selected variable ore flow to be separately gathered and exported. The transverse plane of the fiberglass spiral chute has different slopes, which is particularly suitable for the selection of small particle mineral materials. 螺旋溜槽选金刚砂 spiral chute separation emery III. Features This machine is suitable for separation of fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, phosphorus, wolframite, shatin, tantalum niobium, tantalum niobium or other non-ferrous metal ores, rare mineral metals and non-ferrous metal minerals with gravity differences. This equipment also has advantages such as stable sorting process, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, convenient operation, low investment, and fast efficiency. The spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment acquisition groove, a product gathering bucket, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Spiral Chute Selection of Diamond Sand 螺旋溜槽选金刚砂 Spiral Chute Selection of Diamond Sand