current location: home > News and information > Knowledge of gravity beneficiation
24-hour phone/WhatsApp:+8619870423316
Ganzhou wear-resistant spiral chute 1. Introduction: Fiberglass reinforced plastic spiral chute combines the characteristics of gravity beneficiation spiral chute, gravity beneficiation spiral chute, shaking table, and beneficiation centrifuge. After being organized by the Ministry of Metallurgical Industry for relevant scientific research, design, school, or beneficiation company operation and evaluation, it is recognized as having excellent mechanical performance, advanced selection indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has now been recognized in the field of non-ferrous metals Ferrous is very versatile. This machine is used to separate iron ore, ferrotitanium, ferrochrome, pyrite, zircon ore, Rutile, monazite, phosphate ore, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with density and specific gravity difference from fine and small materials with Granularity of 0.3-0.02 mm. 2、 Technical principle: The fiberglass spiral chute mineral screening device does not need to be stacked on a cross (or tripod) on a support table. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove at the beginning of the spiral groove, and the selection is carried out. A valve block type equipment selection slot is installed at the bottom, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Adjust the orientation of the valve block to obtain the width of each device. The product gathering bucket is a concentric circular tube that collects and leads the intercepted multi head ore flow separately. The cross-section of the spiral chute and the slope of the curve change, which is particularly applicable for the sorting of fine particle materials. Ganzhou wear-resistant spiral chute III. Highlights and characteristics: 1. Ultra high efficiency, high recovery rate, and correct ore separation; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5 strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Ganzhou wear-resistant spiral chute
IV. The chute can be divided into three categories according to the particle size of the ore materials processed: (1) coarse chute, the maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare ore metals and non-metallic ore bodies with gravity difference from 0.3-0.02mm fine materials. Ganzhou wear-resistant spiral chute
Ganzhou wear-resistant spiral chute
Ganzhou wear-resistant spiral chute
Ganzhou wear-resistant spiral chuteRelated Information