How much is the labor cost per ton for installing the belt spiral chute

How much is the labor cost per ton for installing the belt spiral chute

How much is the manual labor cost for installing a belt spiral chute per ton? Describe that the beneficiation chute includes a slope flow sorting process. The slurry is fed to a inclined chute or inclined plane, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the groove, while the lower layer of heavy mineral stays in the groove or flows out at low speed from the bottom. After obtaining the concentrate and tailings, respectively. Glass fiber reinforced plastic chutes are mining and beneficiation equipment, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, strong processing ability, high efficiency, high enrichment ratio, high recovery probability, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The production principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, implementing sorting. The bottom of the rotating groove is equipped with a valve block type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows for the differentiation and aggregation of the obtained variable mineral flow. The cross-section of the spiral chute and the slope change of the curve are very suitable for the selection of fine particle materials. How much is the labor cost for installing the belt spiral chute per ton? 3. The characteristic spiral chute has attracted much attention among various gravity separation machines due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large production per unit area and other characteristics. The equipment has a wider and flatter groove surface, and the mortar presents a large laminar flow area, making it more suitable for processing medium to fine (-4mm) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 t/h. How much is the labor cost for installing a belt spiral chute per ton, ? The structure of the spiral concentrator consists of a feeding equalizer, a cross (tripod), a feeding trough, a spiral trough, a selection trough, a gathering hopper, and a trough pillar. 5、 Usage This equipment is used to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare mineral metals and non-metallic minerals with density and specific gravity difference. How much is the labor cost for installing the belt spiral chute per ton? @ @ 000 @ How much is the labor cost for installing the belt spiral chute per ton

How much is the labor cost per ton for installing the belt spiral chute

How much is the labor cost per ton for installing the belt spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen