Product information display/Product display

How to use spiral chutes for coal washing mud

24-hour phone/WhatsApp：+8619870423316

How to use spiral chutes for coal washing mud

How to use spiral chutes for coal washing mud: 1. Introduction: Fiberglass spiral chutes summarize the characteristics of gravity separation spiral chutes, spiral chutes, shakers, and centrifuges for mineral processing. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is believed that this machine has excellent performance, advanced sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 Working principle: The fiberglass chute separator does not need to be placed on a cross (or tripod) on a support table. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. 洗煤泥怎么用螺旋溜槽 How to use spiral chute for coal washing slime 3. Characteristics This product is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin ore, tantalum niobium, niobium ore and other non-ferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine materials with a Granularity of 0.3-0.02MM. This product has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small land area, less water consumption, simple structure, no power, high output, easy installation, simple operation, low investment, and quick effectiveness. How to use spiral chutes for coal washing mud? 4. The structure of a fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral chute, a product intercepting groove, an equipment gathering hopper or a groove support (including a cross or triangular frame). The rotating groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is easy to control. The ore separator is not restricted from being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through a feeding groove installed at the end of the spiral groove head, and selected for operation. The tail end of the spiral groove is installed in a valve block type new product selection groove, allowing the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multiple ore flows. The lateral plane of the spiral concentrator and the change in slope of the curve are particularly suitable for the selection of small particle ore materials. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. How to use spiral chutes for coal washing mud 洗煤泥怎么用螺旋溜槽 How to use spiral chutes for coal washing mud