Image of spiral chute renovation

Image of spiral chute renovation

Image 1 of Spiral Chute Transformation: Overview of the mineral sorting process in the chute, which belongs to the inclined plane flow sorting step. The slurry is fed to a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with high specific gravity stays in the groove or flows out at low speed from the bottom. After each is connected, the selected ore or tailings are obtained. Spiral concentrators are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation in coastal, river, sand banks, and creeks. The equipment has a suitable structure, is installed in a simple and simple manner, occupies a small land area, has simple operability, stable beneficiation, clear separation, strong processing capacity, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. There are also advantages such as lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The application technique is to make the fiberglass spiral chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in the appropriate position, use a mortar pump to deliver the sand ore to the two feeding ports on the spiral head, enter the supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the rotating inclined plane flow rate, an inertial centrifugal force will appear, resulting in differences in gravity, particle size, and morphology of the ore sand, By obtaining gravity and centrifugal force through swirling flow, the efficiency is achieved, allowing the separation of ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Image 3 of the renovation of the spiral chute. Advantages: 1. Stable, easy to operate, and with a large density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. Spiral Chute Transformation Picture 4. Structural Composition: The fiberglass chute is composed of six parts: a feeding distributor, a feeding trough, a rotating trough, a product cutting trough, an equipment gathering hopper, or a trough bracket (including a cross or triangular frame). The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Spiral chute renovation image Spiral chute renovation image

Image of spiral chute renovation

Image of spiral chute renovationRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen