Coal washing equipment spiral chute manufacturer

Coal washing equipment spiral chute manufacturer

Coal washing equipment spiral chute manufacturer 1 describes that gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low environmental pollution and low cost. The fiberglass spiral chute is a type of gravity beneficiation machinery, with a cubic parabolic shape in the cross-section. It is suitable for handling finer particle levels of -0.2 millimeters. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to obtain fine, medium, and tailings. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Manufacturer 3, Features and Highlights of Spiral Chutes for Coal Washing Equipment at . 1. Large scale and high production capacity. The objective conditions for contemporary ore processing are to use scale effects to create benefits. 2. Fine granulation refers to the treatment of fine-grained minerals, especially for mineral materials with a particle size of -0.047mm. Originally, the machine could generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water flow blocking force to composite and applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals or the separation of fine or micro particles can be increased, thereby improving the recovery rate of mineral materials. 4. Based on energy conservation, environmental protection and consumption reduction, the area and space occupied should be small, and water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Coal washing equipment spiral chute manufacturer IV. The structure of the spiral chute is composed of 6 parts, including a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 The application scope of this machine is to separate iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. Coal washing equipment spiral chute manufacturer Coal washing equipment spiral chute manufacturer

Coal washing equipment spiral chute manufacturer

Coal washing equipment spiral chute manufacturerRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen