Selection of spiral chutes for stone grinding

Selection of spiral chutes for stone grinding

Selection of spiral chutes for stone grinding: 1. Overview: Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. 3. Features 1. Stable and easy control of the sorting process 2. Wide range of allowable changes in ore concentration 3. High enrichment ratio and high recycling rate 4. Small land occupation and low water consumption 5. Simple and simple structure, no need for power 6. Strong processing capacity 7. Easy installation and operation 8. Low investment and effective quick selection of the stone grinding spiral chute 4. The spiral concentrator consists of a feeding homogenizer The feeding chute, spiral groove, equipment cutting groove, product gathering hopper, and groove bracket (including cross or triangular frame) are composed of six parts. The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. She has the advantages of light weight, strength, durability, and the use of consumables. Above the rotating groove is a multi tube ore feeding homogenizer, which distributes ore evenly and has simple control. The mineral separator is not limited to being placed on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the rotating groove through the feeding groove installed on the spiral groove head, and sorting is carried out. The tail of the spiral groove is installed in the valve type new product acquisition groove, and the selected new products are divided into three types (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The cross section of the spiral chute and the different slopes of the curve are particularly suitable for the separation of fine particle materials. 5、 This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. Selection of stone mill spiral chutes Selection of stone mill spiral chutes

Selection of spiral chutes for stone grinding

Selection of spiral chutes for stone grindingRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen