Reverse spiral chute

Reverse spiral chute

Reverse spiral chute 1. Introduction: Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machine, characterized by a cubic parabolic shape on the cross-section. It is suitable for processing finer particles up to -0.2mm in size. In the sorting process, there is no need to add water for flushing, and the end of the chute is divided into sections to obtain fine, medium, and tailings. 2、 The use method is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The ore slurry naturally swirls from high to low, generating a single coherent centrifugal force in the flow speed of the revolving inclined surface, so as to obtain the difference in the specific gravity, Granularity and state of the placer, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. Reverse spiral chute 3. Characteristics 1. The sorting process is stable and easy to operate 2. The allowable range of feed density is relatively large 3. The ultra-high enrichment ratio and recovery rate are high 4. The area occupied is relatively small and the water consumption is small 5. The structure is simple and no power is needed 6. The processing capacity is strong 7. The installation is simple and easy to understand, and the operation is simple 8. The investment is small and the results are quick. Reverse spiral chute 4 The structure of spiral chutes consists of a feeding device, a cross (tripod), a feeding groove, a spiral groove, an acquisition groove, a gathering bucket, and a groove pillar. 5、 The fiberglass chute used in the field can be adapted to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient Density contrast. Reverse spiral chute Reverse spiral chute

Reverse spiral chute

Reverse spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen