Product information display/Product display

Technical specifications of spiral chute

24-hour phone/WhatsApp：+8619870423316

Technical specifications of spiral chute

Spiral chute technical indicator 1 indicates that gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for handling finer particle levels of -0.2mm. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to select fine, medium, and tailings. 2、 The mineral mortar with equal working principles is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and then selected. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Technical indicators 3, highlights and characteristics of the 螺旋溜槽技术指标 spiral chute: 1. High efficiency, high recovery rate, and correct mineral sorting; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; 4. Low cost, long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Technical indicators of spiral chute: 螺旋溜槽技术指标 4. Structural composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together through screws. The selected surface of the spiral groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer for ore separation, which is simple and convenient to control. The mineral screening device does not need to be placed on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is equipped with a valve type new product selection groove, which allows other new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely exports the intercepted variable mineral flows. The transverse surface of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine particle materials. 5、 Use This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic minerals with different specific gravity. Technical indicators of spiral chute: 螺旋溜槽技术指标 Technical indicators of spiral chute