High frequency vibration spiral chute

High frequency vibration spiral chute

High frequency vibration spiral chute 1. Introduction: Gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. The spiral beneficiation machine is one of the gravity beneficiation equipment, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the beneficiation process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 The use method is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The ore slurry naturally swirls from high to low, generating a single coherent centrifugal force in the flow speed of the revolving inclined surface, so as to obtain the difference in the specific gravity, Granularity and state of the placer, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. high-frequency vibration spiral chute III. Advantages: 1. Stable, easy to operate, and with a large density range. 2. High material processing yield, high enrichment ratio, and high recycling rate. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Simple installation, simple operation, low investment, and fast returns. High frequency vibration spiral chutes 4. According to the particle size of the processed ore, the chutes can be divided into three types: (1) Coarse particle spiral chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. High frequency vibration spiral chute High frequency vibration spiral chute

High frequency vibration spiral chute

High frequency vibration spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen