Working principle of titanium ore spiral chute

Working principle of titanium ore spiral chute

Working principle of titanium ore spiral chute 1. It shows that the spiral chute is a combination of the characteristics of spiral concentrator, gravity separation spiral chute, shaking table and gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgical Industry, and the operation appraisal of the design, universities, concentrators and other units, it is believed that the mechanical performance is excellent, the separation goal is improved, and it has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. It is now widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve type product selection groove, which divides the sorting equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to be collected and exported. The cross section and slope of the curve of the spiral concentrator are very suitable for the separation of fine particle materials. Working principle of titanium ore spiral chute 3. Characteristics or highlights 1. Large scale and large production capacity. In principle, today's mineral material processing needs to create revenue by scale effect. 2. Fine granulation, the treatment of fine and micro particle minerals is extremely the treatment of ore materials with particle size of -0.047mm. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., the GRP spiral chute has progressed from simply using gravity and water blocking force to the level of composite use of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of useful minerals and the separation of fine and fine particles can be enhanced, thereby increasing the recovery rate of mineral materials. 4. With energy saving and environmental protection as the basic starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the selection process is stable, the structure is simple, and it is convenient for maintenance management. The working principle of the titanium ore spiral chute is . The structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding groove, a spiral groove, a selection groove, a gathering bucket, and a groove pillar. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Working principle of titanium ore spiral chute Working principle of titanium ore spiral chute

Working principle of titanium ore spiral chute

Working principle of titanium ore spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen