Product information display/Product display

Slime shaker | large shaker tailings selection | tailings sand shaker

24-hour phone/WhatsApp：+8619870423316

Slime shaker | large shaker tailings selection | tailings sand shaker

1、 Overview of Slurry Shaker | Large Shaker Tailings Selection | Tailings Sand Shaker

Shaker is a widely used mineral processing equipment. Shaking bed beneficiation utilizes mechanical vibration and water flow flushing to separate ore particles according to their density. The prominent feature of a shaker is its high ore rich ratio. It is usually used to obtain concentrate and can also separate tailings, effectively treating fine-grained materials.

2、 Classification of mineral processing shakers

Coarse sand shaker, with a processing particle size of 2~0.2mm;

2. Fine sand shaker, with a processing particle size of 0.2~0.074mm;

3. Mineral mud shaker, with a processing particle size of less than 0.074mm.

3、 Slime shaker | large shaker tailings selection | application of tailings sand shaker

It can be used to select rare and precious metal ores such as tungsten, tin, tantalum, niobium, as well as iron, manganese ore, and coal. When processing tungsten and tin ore, the effective recovery particle size range of the shaking table is 2~0.04mm.

4、 Mud Shaker | Large Shaker Tailings Selection | Structural Characteristics of Tailings Sand Shaker

The equipment is mainly composed of bed surface, bed head, feeding end, transmission device, machine base and other components. The equipment accessories are well selected, the process is mature, the overall quality is reliable, and the operation is stable.

The bed surface can be made of wood or aluminum, and the slope of the bed surface can be adjusted. There are bed strips of different lengths and heights on the bed surface. The length and height of the bed strip gradually increase from the feeding side to the clean coal side. The height of each bed strip gradually decreases to zero from the head to the end of the bed.

Under the drive of the bed head, the bed surface undergoes longitudinal reciprocating asymmetric motion. When the bed moves forward, its speed changes from slow to fast, and then quickly stops (with a large backward acceleration, particles gain a large forward inertial force). When retreating, its speed rapidly increases from zero to a larger value, and then slowly decreases to zero (with small forward acceleration and small backward inertial force of particles).

5、 Slime shaker | large shaker tailings selection | working principle of tailings sand shaker

1. The layering effect of water jump and rising water flow formed when water flows through the bed.

The severe shaking of the bed surface enhances the interference of the oblique water flow. Layered results: Low density fine particles above, high density coarse particles below, combined.

2. The separation effect caused by the shaking of the bed surface.

The shaking of the bed surface causes the bed to loosen. Under the same density conditions, the pressure on fine particles is relatively high, and fine particles can enter the lower layer of the bed through coarse particle gaps. High density fine particles have a higher pressure. Therefore, high-density fine particles 3 drill deeper than low-density fine particles.

During the sorting process, the above two sorting functions coexist, with separation and layering playing a dominant role. Rising water flow can better separate low-density substances in mixed heavy products.

6、 Slime shaker | large shaker tailings sorting | tailings sand shaker sorting process

The flushing water enters from the shaking table water supply tank, covering the horizontally inclined bed surface, forming a uniform inclined thin layer of water flow. When the material (slurry with a concentration of 25%~30%) flows from the feed tank to the bed surface, the mineral particles in the bed strip or carving groove are washed by water and the bed surface vibrates and becomes loose. Layered. The upper layer of light mineral particles has a significant impact force, most of which tilt horizontally along the bed surface, known as the tailings side. The heavy mineral particles at the bottom of the bed move longitudinally due to the differential movement on the bed surface, and are discharged from the opposite side of the transmission end to the concentrate, known as the concentrate end. The horizontal and vertical effects of different densities on the bed surface vary, and the subsequent movement direction is different. On the bed surface, it is fan-shaped and can receive various products of different qualities. According to the classification of the range of processed mineral particles.

7、 Mud Shaker | Large Shaker Tailings Selection | Tailings Sand Shaker Price

The price of mineral processing shakers is relatively cheap, with high production efficiency, which can save users time and reduce investment costs. How much is the mineral processing shaker? Because the manufacturers provide different specifications and models of mineral processing shakers, the market pricing of mineral processing shakers varies. The company can provide you with appropriate stock selection plans and scientific valuations according to your needs.

The shaking table produced by Jinqiang runs smoothly, has a low failure rate, good quality, and affordable prices. If appropriate, users can visit the factory. Conduct surveys, make phone appointments, and the company can provide users with free technical consultation.