Product information display/Product display

Hydraulic radial jig

24-hour phone/WhatsApp：+8619870423316

Hydraulic radial jig

1、 Overview.

Hydraulic Jig | Hydraulic Radial Jig | Hydraulic Jig is developed from circular filters and mainly consists of two parts: the drive is mechanical hydraulic, and the power is driven by a motor through a variable speed mechanism and a reducer output shaft. The plunger of each main transmission cylinder is driven by a cam for periodic reciprocating motion, thereby converting electrical energy into mechanical energy and then into hydraulic energy. Driven by hydraulic pipes and various valves, it drives the up and down pulsation of the filter cone bucket. Hydraulic Jig | Hydraulic Radial Jig | Hydraulic Jig uses electromagnetic speed control asynchronous motor to achieve impulse regulation, belonging to stepless regulation, with an impulse regulation range of 0-90 times/minute.

2、 Advantages

Hydraulic Jig | Hydraulic Radial Jig | Hydraulic Jig has many advantages compared to various domestic beneficiation filters: large filtration area and strong processing capacity; Due to the fan-shaped shape of the filter tank, it is conducive to the recovery of fine materials; Compact structure, centralized ore feeding, small space for ore separation, suitable for use on mining vessels; Due to hydraulic transmission, the transmission mechanism is simplified and power is saved. A 9-room DYTA-7750 filter has a total power of 11.6kw, which saves about 55% of the power compared to ordinary filters with the same beneficiation area. The filtration curve of hydraulic jigging machine | hydraulic radial jigging machine | hydraulic jigging machine is similar to a serrated asymmetric pulsation curve, which is not only conducive to the recovery of fine and heavy minerals, but also greatly reduces the amount of water added under the screen of the filter. The amount of water added by the filter is about one fourth of that of a regular filter.

3、 Application

At present, hydraulic jigs | hydraulic radial jigs | hydraulic jigs have been widely used in mining ships as roughing equipment to select placer gold, tin, diamond, tungsten, manganese, Hematite and other ores. After years of practice, this jig has achieved good beneficiation results.

4、 Advantages and characteristics.

One is the hydraulic jig | hydraulic radial jig | hydraulic jig with large processing capacity, small footprint, and wide particle size range.

The second is high enrichment ratio and high recovery rate.

Three type hydraulic jig | Hydraulic radial jig | Hydraulic jig is easy to install, operate, and maintain.

The fourth is that the pulsation curve makes heavy minerals easier to sink.

Fifth, it saves 60-70% water and 55% electricity compared to traditional jigs

Six is to use adjustable speed motors.

Seventh, the hydraulic jig | hydraulic radial jig | hydraulic jig is suitable for selecting gold, tin, diamond, tungsten, manganese, Hematite and other minerals, especially manganese ore, Baryte dressing.