Product information display/Product display

Jigging machine for silver selection | silver ore jigging machine | lead zinc ore jigging machine

24-hour phone/WhatsApp：+8619870423316

Jigging machine for silver selection | silver ore jigging machine | lead zinc ore jigging machine

1、 Overview

The jigging machine for silver selection | silver ore jigging machine | lead zinc ore jigging machine is one of the key equipment for gravity beneficiation. Due to its large processing capacity, wide particle size range, high recovery rate, and good effect, the jigging machine is widely used for silver ore selection, silver ore jigging machine, and lead zinc ore jigging machine for sorting non ferrous metallurgical mines such as placer gold, tin, tungsten, lead, zinc, antimony, manganese, diamond, iron ore, and gold mining ships. The JT4-2 and JT1.5-2 Sawtooth wave wave large particle jigs in this kind of products can feed ores with a maximum particle size of 30MM, and discharge ores on the screen and below the screen. It is applied to the beneficiation of Baryte ore, manganese ore, iron ore and other ores, and has the advantages of wide ore feeding particle size range, significantly reducing the amount of make-up water under the screen, etc.

Jigging machine for silver selection | silver ore jigging machine | lead zinc ore jigging machine(图1)

2、 Working principle

Traditional jigs are mostly driven by circular eccentricity, and their jigging pulsation curves are mostly sinusoidal. Due to the fact that the rising and falling water flow velocities and action times generated by diaphragm movement are basically the same, it is not conducive to the loosening of the jigging bed layer and the stratification of ore particles according to specific gravity, thereby affecting the equipment's sorting ratio and recovery rate.

The jig for silver separation | silver ore jig | lead zinc ore jig is an energy-saving gravity concentration equipment developed and improved on the basis of the traditional jig according to the theoretical layering law of the jig bed. Its jigging pulse curve is zigzag, making the rising water flow faster than the falling water flow: the rising time is short, and the Fall time is long; Overcoming the defects of sine wave and pulsating curve jigs that generate rising and falling water flow with the same action time, enhancing the bed's looseness, alleviating the suction effect, and allowing the heavy ore particles in the minerals to fully settle, greatly improving the equipment's sorting capacity and recovery rate. Compared with the sine wave jig, it has increased Sn 3.01%, W 5.5%, Pb 1.63%, and Zn 2.04%, respectively; The water consumption is reduced by 30% -40%, the floor area is reduced by 1/3, and the stroke is adjustable. Due to the use of electromagnetic adjustment motors for dragging, the stroke can be adjusted steplessly. Its performance has reached the advanced level in China. The sawtooth jig | Sawtooth wave wave jig | mineral jig is one of the ideal energy-saving gravity separation equipment at present.

Jigging machine for silver selection | silver ore jigging machine | lead zinc ore jigging machine(图2)

3、 Advantages and characteristics

1. Large processing capacity and wide selection granularity range;

2. High enrichment ratio and high recovery rate;

Easy to install, operate, and maintain;

The pulse curve of the 4 jigs for silver selection | silver ore jigs | lead zinc ore jigs makes it easier for heavy minerals to sink;

5 saves 30-40% water compared to traditional jigs;

6. Adopting adjustable speed motors;

7 It is suitable for beneficiation of placer gold, tin, titanium, hematite, iron ore, coal and other minerals, especially in the field of manganese ore and Baryte beneficiation.