Drum washing machine

Drum washing machine

1、 Introduction

The drum washing machine, also known as the drum washing machine, is used for manual desliming of sand and stone below 80mm. It has the advantages of large feed particle size distribution, powder content of cleaned stone less than 0.5%, and moisture content less than 2%. The equipment of Jiangxi Shicheng drum washing machine manufacturer is no different from other drum washing machines except for its different structure.

2、 Application

The equipment and products of Jiangxi drum washing machine manufacturers have a very high level of sand and stone cleaning. In many stone production lines, the equipment of Shicheng drum washing machine manufacturers has also been widely used. The equipment is mainly used for desilting and selection of sand and stone in construction sites, stone yards, cement plants, and hydropower projects, as well as for iron ore selection. Jiangxi Shicheng cylindrical washing machine has the advantages of large production capacity, low operating noise, and more convenient maintenance compared to spiral washing machines.

3、 Working principle

The raw materials fall vertically from the upper end of the equipment into the high-speed centrifugal impeller. Under the effect of rapid Centripetal force, they collide and break rapidly with another part of the raw materials flowing around the centrifugal impeller in an umbrella shape. After the raw materials collide with each other, they will collide and rub with each other for several times in the middle of the centrifugal impeller and the housing with the raw materials, and they will be discharged directly from the bottom, The cable digital TV cycle system is generated for several times, and the particle size distribution of finished products is regulated by the screening equipment.

4、 Characteristics and advantages

1. The output is large, and the sand washing output of Jiangxi drum washing machine manufacturers' equipment has greatly increased.

2. The higher energy utilization rate reduces the energy consumption damage caused by the wheel bucket during the entire process of improvement, making the kinetic energy more powerful and reasonably utilized.

3. Reduced the damage to some components, the sand washing machine does not need to lift the stainless steel screen, thus reducing the wear and tear of the stainless steel screen and increasing the service life of the equipment of the Shicheng drum washing machine manufacturer.

4. The actual cleaning effect is stronger. Compared with the single bucket wheel, the spiral sand washing machine takes a large amount of time and frequency for sand material to undergo rotary cleaning, resulting in a stronger cleaning effect.

Drum washing machine

Drum washing machineRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen